The S3151 allows for maximum output and optimum control
The S3151 uses dual ball bearings and has a Max torque of 56 oz / inch with a speed of 0.19 sec / 60 degrees making this an ideal servo for high end machine needing lots of power with accurate speedy control.

- Control System:
+Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range:
20 to +60 Degree C
Operating Speed (4.8V): 0.21sec/60 degrees at no load
Operating Speed (6.0V): 0.19sec/60 degrees at no load
Stall Torque (4.8V): 43 oz/in
(3.1kg.cm)
Stall Torque (6.0V): 56 oz/in. (4.0kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Current Drain (4.8V): 7.2mA/idle
Current Drain (6.0V): 8mA/idle
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 12 inch
Dimensions: 1.6 x 0.8x 1.4 inch (41 x 20 x 36mm)
Weight: 1.5oz. (43g)