This light weight precision servo has very low current draw and high speed output. The Hitec HS-50 servo is a modern miracle of miniaturi - zation. Featuring precision components that have been engineered to provide long lasting trouble free service. The HS-50 is the perfect choice for any micro application from indoor R/C and hand launch gliders to ultra small electric Park and Yard flyers Speed 400 and 1/2A powered aircraft.
- Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts
Operating Temperature Range:
20 to 60 Degree C
Test Voltage: 4.8 Volts
Operating Speed: 0.09sec/60 degrees at no load
Stall Torque: 8.33 oz/in. (0.6kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain: 8mA/idle and 100mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: None outer case serves as bearing
Gear Type: All Nylon
Connector Wire Length: 6.29 inches (160mm)
Dimensions: 0.82 x 0.44 x 0.86 inches (20.9 x 11.4 x 22mm)
Weight: 0.22oz (6.4g) 0.21oz (6.1g) without horn or screw
